Please update your browser - this browser is not supported!

    Please contact us if you would like to receive detailed information about specific projects. *mandatory fields

    I agree to ELHA's data processing/storage and have read the privacy statement.

    Process solutions

    Reset filters

    Please contact us if you require detailed information about specific projects.

    Aggregate Holder
    Reference number:110
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:36-37s
    Aggregate Holder
    Reference number:82
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:35-40s
    Outer Plate Support
    Reference number:88
    Group:Gearbox
    Machine:FM 3+X
    Processing type:drilling
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:26s
    Brake Support
    Reference number:144
    Group:Brake
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Steel
    Cycle Time:12,5-32,5s
    Cylinder Head Cover
    Reference number:64
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:1
    Clamping positions:1
    Material:Alum.
    Cycle Time:62s
    Throttle Body
    Reference number:145
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:25-30s
    Pressure Piece
    Reference number:143
    Group:Brake
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Steel
    Cycle Time:59s
    Filter Body
    Reference number:149
    Group:Pump
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:18s
    Housing (Tandem Cylinder)
    Reference number:33
    Group:Brake
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:1/2
    Clamping positions:2
    Material:Alum.
    Cycle Time:65/39s
    Gear Drive Shaft
    Reference number:70
    Group:Gearbox
    Machine:FM 3+X
    Processing type:drilling
    Workp. simultaneous:4
    Clamping positions:1
    Material:Steel
    Cycle Time:40s
    Gearbox Selector Shaft
    Reference number:119
    Group:Gearbox
    Machine:FM 3+X
    Processing type:rest machining*
    Workp. simultaneous:4
    Clamping positions:1
    Material:Steel
    Cycle Time:12s
    *workpiece pre-turned
    Gearbox Housing
    Reference number:500
    Group:Gearbox
    Machine:FM 4+X
    Processing type:hole pattern
    Workp. simultaneous:1
    Clamping positions:1
    Material:Alum.
    Cycle Time:58s
    Gearbox Housing
    Reference number:108
    Group:E-Tool
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:24s
    Gear Shaft Sun Gear
    Reference number:67
    Group:Gearbox
    Machine:FM 3+X
    Processing type:drilling
    Workp. simultaneous:5
    Clamping positions:1
    Material:Steel
    Cycle Time:20s
    Gear Shaft Sun Gear
    Reference number:68
    Group:Gearbox
    Machine:FM 3+X
    Processing type:drilling
    Workp. simultaneous:2
    Clamping positions:1
    Material:Steel
    Cycle Time:20-23s
    Holder
    Reference number:100
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:37,5s
    Cardan Swivel Head Fork
    Reference number:59
    Group:Miscellaneous
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Steel
    Cycle Time:48/63s
    Compressor Casing
    Reference number:31
    Group:Engine
    Machine:FM 3+X
    Processing type:rest machining*
    Workp. simultaneous:2
    Clamping positions:1
    Material:Steel
    Cycle Time:42s
    *workpiece pre-turned
    Crankshaft Bearing Housing
    Reference number:501
    Group:Engine
    Machine:FM 4+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:3
    Material:Steel
    Cycle Time:55s
    Bearing Holder
    Reference number:126
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:4
    Clamping positions:1
    Material:Alum.
    Cycle Time:8s
    Bearing Pedestal
    Reference number:19
    Group:Chassis
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:1
    Clamping positions:1
    Material:Alum.
    Cycle Time:30s
    Bearing Bridge
    Reference number:152
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:29s
    Bearing Bridge
    Reference number:108
    Group:E-Tool
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:24,5s
    Bearing Housing
    Reference number:139
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:14s
    Oil Guidance
    Reference number:206
    Group:Gearbox
    Machine:FM 3+X
    Processing type:drilling
    Workp. simultaneous:5
    Clamping positions:1
    Material:Steel
    Cycle Time:61s
    Wheel Brake Cylinder
    Reference number:1
    Group:Brake
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:30s
    Wheel Carrier
    Reference number:115
    Group:Chassis
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:1
    Clamping positions:2
    Material:Alum.
    Cycle Time:52s
    Roller Ring
    Reference number:15
    Group:Pump
    Machine:FM 3+X
    Processing type:rest machining*
    Workp. simultaneous:2
    Clamping positions:1
    Material:Steel
    Cycle Time:35s
    *after turning and contouring
    Rotor Disc
    Reference number:83
    Group:Engine
    Machine:FM 3+X
    Processing type:drilling
    Workp. simultaneous:6
    Clamping positions:1
    Material:Steel
    Cycle Time:30s
    Shift Case
    Reference number:152
    Group:Gearbox
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:1
    Clamping positions:2
    Material:Alum.
    Cycle Time:145s
    Worm Housing
    Reference number:66
    Group:Steering System
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:48s
    Swivel Bearing
    Reference number:43
    Group:Chassis
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:1
    Clamping positions:2
    Material:Steel
    Cycle Time:68/55s
    Sensor Cover
    Reference number:112
    Group:Gearbox
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:14s
    Sensor Housing
    Reference number:98
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:27s
    Servo Pump Housing
    Reference number:104
    Group:Steering System
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:2
    Material:Alum.
    Cycle Time:27s
    Track Rod End
    Reference number:23
    Group:Chassis
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Steel
    Cycle Time:45s
    Jigsaw Gear Cover
    Reference number:90
    Group:E-Tool
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:1
    Clamping positions:1
    Material:Alum.
    Cycle Time:38s
    Jigsaw Gear Housing
    Reference number:90
    Group:E-Tool
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:1
    Clamping positions:1
    Material:Alum.
    Cycle Time:44s
    Ram Body
    Reference number:61
    Group:Engine
    Machine:FM 3+X
    Processing type:rest machining*
    Workp. simultaneous:4
    Clamping positions:1
    Material:Steel
    Cycle Time:18,5s
    *workpiece pre-turned
    Turbine Housing
    Reference number:116
    Group:Engine
    Machine:FM 3+X
    Processing type:Initial machining
    Workp. simultaneous:2
    Clamping positions:1
    Material:Steel
    Cycle Time:97,5s
    Valve Block
    Reference number:74
    Group:Brake
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:2
    Material:Alum.
    Cycle Time:64s
    Valve Housing (Power Steering System)
    Reference number:30
    Group:Steering System
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:2
    Material:Alum.
    Cycle Time:26s
    Front Wheel Hub
    Reference number:111
    Group:Chassis
    Machine:FM 3+X
    Processing type:drilling
    Workp. simultaneous:2
    Clamping positions:1
    Material:Steel
    Cycle Time:50s
    Water Pump Housing
    Reference number:139
    Group:Pump
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:2
    Clamping positions:1
    Material:Alum.
    Cycle Time:21s
    Central Release Bearing
    Reference number:56
    Group:Gearbox
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:1
    Clamping positions:1
    Material:Alum.
    Cycle Time:172s
    Cylinder Head
    Reference number:40
    Group:Engine
    Machine:FM 3+X
    Processing type:complete
    Workp. simultaneous:4
    Clamping positions:2
    Material:Steel
    Cycle Time:27/13,5s
    OK

    By using this website you agree that we use cookies. Further information can be found in our data privacy statement.